X
Research source
Scientists are studying ways to use desalination on a global scale, but you can desalinate water yourself with just a cup, a bowl, and some sunlight.
This process of desalination is called distillation. It can be used to remove many impurities, because just the water is evaporated and dissolved solids are left behind.
Gathering Your Materials
Use water and salt. Before you can desalinate the water, you will need to create saline water, or salt water. You can use tap water, or saltwater if available. If you happen to live near an ocean, you can skip these materials and fill a bottle with seawater. Seawater is full of salt and great for use in the desalination process.
Get a large bowl and a cup or container. You will use this container to collect the condensed water and the large bowl will hold the salt water. The bowl should be big enough to fit the container with room to spare above. You will also need some of plastic cling wrap, or other clean covering, to cover the bowl, and a small weight like a rock.
Place the bowl in direct sunlight. like a window sill or garden.
Making the Desalination Device
Pour water into the bowl. You do not need to fill the bowl up too much, just until it appears 1 inch deep with water. Mix enough salt into the water so it tastes salty. Start with a small amount of salt and taste just a drop to ensure it is salty. Put the salt water into the large glass bowl. You will then need to rinse and dry the mug to ensure there is not salt residue in the mug.Desalinate Water Step 5 Version 3.jpg Once you have rinsed and dried the mug, you can put it in the center of the glass bowl in the 1 inch of salt water.
Cover the glass bowl with plastic cling wrap. Make sure the cling wrap is stretched tightly over the mug and the sides of the bowl, with no open areas around the rim of the bowl.
Place the bowl in direct sunlight. Look for a window sill or a spot on your deck outside that gets lots of direct sunlight and make sure the bowl is on a nice, even surface in the sun. Place the small weight or rock on the top of the cover, right above the cup. The plastic wrap should sag in the center of the cup due to the weight of the rock. This will ensure the condensed water falls into the cup so you can drink it.
Leave the bowl in the sun for three to four hours. After several hours in the sun, the evaporated water rises. This will lead to the formation of water droplets on the cover. The water droplets should then drip from the point of the weight, into the cup.
Check the cup for fresh water. After the bowl has been in the sun for three to four hours, check the cup for a small amount of water. Remove the plastic wrap and drink the water in the cup. You should taste nothing. This is pure, distilled water. This desalination device works by using the sun to warm up the salt water. The plastic wrap helps to trap the water vapors in the bowl as the salt water evaporates. Because the top of the plastic wrap is much cooler than the rest of the bowl, the humid air in the bowl condenses on the top of the plastic wrap and forms water droplets. Over time, the water droplets on the plastic wrap grow larger and start to flow to the center of the bowl due to the weight of the rock. As the water droplets build up, they grow heavier and eventually fall into the cup. The result of this simple desalination device is a cup of fresh drinking water that does not contain any salt.
Comments
0 comment