Crafting the Squares
Push 2 strands of dry spaghetti into 1 marshmallow. Line up the 2 spaghetti strands. Push them evenly into the top round side of the marshmallow. Use full-size marshmallows rather than the miniature kind. Using 2 strands of spaghetti instead of just 1 will strengthen your tower and help it to eventually stand upright. Push the spaghetti far enough into the marshmallows so that it feels stable, but not far enough to come through the opposite side. Around halfway will do. Make sure to center the spaghetti. If you put too much weight on one side, the marshmallow will probably tip over.
Make a right angle with 2 more strands of spaghetti. Line up 2 more spaghetti strands. Push them into another side of the same marshmallow to form a corner. It might be tricky to push these next spaghetti strands into the same marshmallow. Do it carefully, and try to add the strands just next to where the first strands were pushed in.
Add a marshmallow to each end of the spaghetti strands. Push a marshmallow firmly onto each end. Be careful when adding marshmallows to spaghetti that has already been connected, as it can easily break with too much pressure. Replace any broken strands of spaghetti with new strands.
Push 2 strands of spaghetti into each new marshmallow. Create 2 more right angles. Make sure that the strands are lined up well, and are as close to 90° as possible. This will ensure that your tower is sturdy. Your square so far will look like a rigid “U” shape.
Use 1 more marshmallow to connect the final ends of the spaghetti strands. Push the remaining strands of spaghetti into 1 last marshmallow. Do this as carefully as possible to avoid breaking the rest of the square. You should now have a completed square shape made out of 4 marshmallows and 8 strands of spaghetti.
Build as many more squares as you like. The greater the number of squares that you build, the higher that your tower will be. Your initial squares will become the base for your tower. Start with 9 squares if you are not sure how many to begin with. This will give you good practice in creating a smaller tower.
Making the Pyramids
Place 2 strands of spaghetti into the top of each marshmallow. Each of the 4 marshmallows in each square needs 2 strands of spaghetti inserted into the top. Align these so that they point straight. Each square will end up with 8 more spaghetti strands pointing upwards.
Gather the strands of spaghetti and connect these with a marshmallow. Grasp the 8 strands of spaghetti that are pointing upwards. Hold them together tightly as you firmly push a marshmallow onto the end. The marshmallow will connect the strands and hold them together in a point type shape.
Make more pyramids using the rest of the squares that you made. Add the spaghetti strands to the tops of the marshmallows. Join these together into a point using a final marshmallow. If you began with 9 squares, you will end up with 9 pyramids in total.
Arrange the completed pyramids to create a base for your tower. Align the pyramids that you just made so that they look like a square or rectangle from above. If you have 9 pyramids, align these to be 3 pyramids across by 3 wide. Make sure that the base pyramids are close together to ensure that your tower is stable.
Connect the central marshmallows at the top of the base with spaghetti. Push spaghetti strands horizontally to make more square shapes on the top of the base. Make sure that these are connected firmly, as they will become the base for the next layer. Be very careful to avoid leaning or placing pressure on the base pyramids.
Repeat the process of making pyramids. Insert spaghetti strands coming from the top of each of the marshmallows. Connect the strands from each square using a central marshmallow. You will notice your tower beginning to narrow in as it gets taller.
Continue building the tower until you reach 1 marshmallow point. Keep adding spaghetti strands horizontally and vertically to make square bases and points. Work as carefully as possible as you make your way up the tower to avoid breaking any pieces. The bigger your tower, the longer it will take to reach the top.
Designing a Competition
See who can build the best tower in a limited amount of time. Have all of the supplies ready before you begin. Set the timer, and compare towers at the end! Around 20 minutes is a good place to start for a competitive spaghetti tower match. You don’t have to compete with others. Try timing yourself, and see if you can build a better tower each time. You can judge the towers based on height or stability.
Compete to see who builds the tallest tower. Get all of the supplies, and see which group can build the tallest tower before it collapses. You may need to start building the tower on the ground, and stand on a secure chair as it grows! Have a measuring tape ready so that you can measure the end results.
Limit the supplies that are available. Try using just 20 strands of spaghetti and 1 marshmallow for each tower. You will need to break the marshmallow into smaller pieces for this type of competition. With limited supplies, the design of the towers will need to vary. Get creative, and see how tall and stable you can make a tower with only 1 marshmallow.
Comments
0 comment