How to Put Snow Tires on Your Car

Find a flat, safe and dry workplace. Make sure the car can’t roll.

Prepare the four snow tires next to you.

Remove the hub-cap of the four tires.

Loosen the nuts by turning counter-clockwise using a spanner. Use the key to loosen the nuts. Be careful to not completely loosen the nuts.

Place the jack under the car. Make sure the jack is positioned in front of the mark specially made for this operation.

Turn the jack's crank to raise the tire from the ground. You need to raise the tire enough to pull it to you after. About twenty centimetres from the ground should be enough.

Remove the nuts completely. Be careful to not loose the nuts, so, put them in a box in order to not to loose them.

Remove the wheel.

Place the snow tire on the hub.

Tighten the nuts by turning them clockwise by hand until they are all tight. You can tighten the nuts in a staggered manner. Avoid using too much force to tighten the nuts because you could upset the balance of the jack.

Lower the car to the ground using the jack.

Tighten the nuts as much as possible with a spanner that fits.

Remove the jack.

Repeat for the others tires on the step 4 to step 13.